20mm Dual Pointer Assembly

The Proparms 20mm Dual Pointer is a new laser that has been preset to have two laser dots converge into one point at a distance of 3 metres. At a distance of less than 3 metres, the target area is centred between the two points.

Compatible for use with:

Product Benefits:

  • 2 red laser beams of 5 mW power or below (eye-safe).
  • Single point of convergence of the two beams is preset at 3 metres.
  • Provides a dual dot reference that is mechanically aligned on the barrel’s axis.
  • Securely mounts over the barrel of the disrupter, minimising movement during firing.

General Specifications:

  • Dimensions (L x W x H): 8.7 cm x 9.5 cm x 6.3 cm
  • Weight: 0.55 kg
  • Composition: Aluminium, Stainless Steel & Brass
  • Convergence point: Preset at 3 metres
  • Laser diode beam colour: Red
  • Laser power output: < 5mW (visible), <1mW (Infrared)
  • Laser diode wavelength: 632-1550 nm
  • Laser class: IIIA (eye safe)
  • Battery type: Single cell, CR123, 1300 mAh Lithium (battery not supplied)
  • Battery voltage output: 3 Volt
  • Number of batteries used: 1
  • Battery operating life: Approx. 15 hours