Manual Access Kit (MAK)
Used as a standalone kit or as part of the 2nd Line EOD Tool Kit, the Manual Access Kit (MAK) is outfitted with the tools necessary to stabilise and access devices in order to perform render safe procedures. The kit includes Tactical Electronics 15 cm trip wire probe providing the operator immediate response when a trip wire is encountered, during slow methodical or dynamic searches. Additionally, the Manual Access Kit includes the Tactical Electronics black out cloth; this lightweight cloth reduces light influence on suspect devices or contains light during those times when light discipline is required.
Features
- Manually enter and neutralise an IED
- Includes tools to stabilise and access devices
- Includes 15 cm trip wire probe
- Bit Kit included for Milwaukee drill
Manual Access Kit contents:
- MAK Customised Nylon Bag (1)
- Milwaukee 12V Drill with Charger and Extra Battery (1)
- Devcon 1 Minute Epoxy Gel (3)
- Irwin Vice Grip GV8 Groove Lock 20 cm Pliers (1)
- Fiskar Titanium Nitride 20 cm Shop Snip (1)
- Tactical Electronics Black Tarp 152 x 152 cm (1)
- Milwaukee 12V Rotary Tool (1)
- Garrett Metal Detector (1)
- Jilson Shear (1)
- ITW Devcon Magic Bond Putty (1)
- ITW Devcon – 1:1 Mix Nozzles (12)
- ITW Devcon – MK5 Applicator Gun (1)
- 30.5 cm Titanium Pry Bar (1)
- Broken Screw Extractor (1)
- SERE 70 Light Stick Blue (1)
- SERE 70 Light Stick EOD (1)
- Non-Metallic Letter Opener (1)
- 18 cm Straight Jaw Locking Pliers (1)
- Wood Chisel 1.2 cm (1)
- Wood Chisel 2.5 cm (1)
- Selflock Snap Knife (1)
- Selflock Snap Knife Replacement Blades (3)
- Cooper Butane Powered Soldering Iron (1)
- Miltex Forceps – Insulated (1)
- 30.5 cm Alligator Clips (6)
- Windshield Removal Tool (1)
- 183 cm Trip Wire Probe (1)
Bit Kit contents: (included with MAK)
- Bit Kit Customised Nylon Bag (1)
- Bosch Step Drill Bit SDT 12 (1)
- Bosch Step Drill Bit SDT 5 (1)
- 9mm Titanium Twist Drill (1)
- 4 mm Hex Shank Drill (1)
- 6 mm Titanium Twist Drill Bit (1)
- X-Selector bit set with slotted, Phillips, Torx bits and quick release holder (1)
- Tungsten Carbide Tipped 15 mm hole cutter (1)
- Saber Cut Bits (1)
- EZ Drum (2)
- Sanding Bands (1)
- EZLock Mandrel (2)
- EZLock 38 mm Diamond Wheel (2)
- EZLock 38 mm Carbide (2)
- EZLock 38 mm Reinforced Cutoff Wheel (5 pack) (1)
- EZLock 38 mm Reinforced Cutoff Wheel EZ456 (5 pack) (1)
- Champion 19.3 cm Hole Cutter (1)
- Rotozip Bits 3mm (5 pack) (1)
